Real-Time Robotics Framework

User Tools

Site Tools

You are here: EEROS Wiki » EEROS Architecture » Control System » Available Blocks » RP Lidar
eeros_architecture:control_system:available_blocks:rplidar

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
eeros_architecture:control_system:available_blocks:rplidar [2021/11/10 15:39] – ursgrafeeros_architecture:control_system:available_blocks:rplidar [2021/11/10 16:26] (current) – ursgraf
Line 2: Line 2:
 This block is used to gather data from a RP lidar laser range sensor, [[https://www.slamtec.com/en/Lidar/A2]]. It is connected through a serial port and offers two outputs, being the distance and the angles. This block is used to gather data from a RP lidar laser range sensor, [[https://www.slamtec.com/en/Lidar/A2]]. It is connected through a serial port and offers two outputs, being the distance and the angles.
  
-You have to fetch and install a suitable library first, see [[getting_started:install_wrapper#rp_lidar|RPLidar]]+You have to fetch and install a suitable library first, see [[getting_started:install_wrapper#rp_lidar|RPLidar]].
eeros_architecture/control_system/available_blocks/rplidar.txt · Last modified: 2021/11/10 16:26 by ursgraf