User Tools

Site Tools


eeros_architecture:hal:scaling_multi

This is an old revision of the document!


Setting Multiple Scales and Ranges

The existing hardware is often comprised of several stages such as a digital to analogue converter, an amplifier, and the motor constant.

Example of output with multiple stages

In such cases it is very handy to describe each stage individually as given in the following example

  "channel0": {
    "signalId": "dacOut",
    "scale": [ { "id" : "dac",
                 "minIn":    1000, "maxIn":  64000,
                 "minOut": -9.787, "maxOut": 9.923 },
               { "id" : "amp",
                 "minIn":   -10.0, "maxIn":  10.0,
                 "minOut":  -7.0, "maxOut": 7.0 },
               { "id" : "kM",
                 "minIn":   -5.0, "maxIn":  5.0,
                 "minOut":  -1.0, "maxOut": 1.0 } ],
    "range": [ { "id" : "dac",
                 "minIn":       0, "maxIn":  65536,
                 "minOut":  -10.0, "maxOut":  10.0 },
                 { "id" : "amp",
                 "minIn":   -10.0, "maxIn":  10.0,
                 "minOut":  -7.0, "maxOut": 7.0 },
                 { "id" : "kM",
                 "minIn":   -5.0, "maxIn":  5.0,
                 "minOut":  -1.0, "maxOut": 1.0 } ],
    "unit": "Nm"
  }

The HAL will calculate the scale and range of the whole chain considering the single steps. The range of the whole chain will be determined by the most restricting range of the single stages. The unit is determined by the unit of the last stage.

Two Inputs or Outputs with Different Scales

There are cases where you want to read from a hardware input while this input might represent different things. A motor with its current and torque could serve as an example.

Reading from input with different scaling
  • Scale1 : scaling for the adc converter
  • Scale2 : scaling for motor current. This input allows for current control of the motor.
  • Scale3 : scaling for motor torque. This input allows for observation of the motor torque.

For outputs we have a similar situation. A motor might be controlled by setting its current during homing of the drive. During normal operation the motor will be controlled by setting its torque.

Writing from to output with different scaling

The scaling in the HAL includes the common part of the two outputs while each control signal have their individual scaling as well.

eeros_architecture/hal/scaling_multi.1499239846.txt.gz · Last modified: 2017/07/05 09:30 by graf