Differences

This shows you the differences between two versions of the page.

--- eeros_architecture:practical_problems:start [2017/04/07 12:39] – [How to Stop a System with CTRL-C] graf
+++ eeros_architecture:practical_problems:start [2017/09/24 15:39] (current) – removed graf
@@ Line 1: / Line 1: @@
-====== Practical Problems ======
-Every EEROS system consists of a control system, a safety system, and a sequencer. In order to guarantee maximum stability we strongly recommend that you adhere to a strict set of design rules as given below.
-===== Trigger Safety Event from Control System =====
-It is not advisable to use the safety system to check signals of the control system. This causes unnecessary confusion and blows up the safety system. Rather insert a [[eeros_architecture:control_system:available_blocks:checker|]] into your control system and let it trigger a safety event from there.
-===== Avoid Hidden States in the Safety System =====
-It might be tempting to define elaborate actions in a certain safety level. However, in order to keep the safety system clean and simple avoid such practises. Do not define different states in a safety level. If you need to stay a certain amount of time in a safety level use the field ''nofActivations'' as described in [[eeros_architecture:safety_system:properties#counter|]]. As soon as you want to model a more complex behaviour use a [[eeros_architecture:sequencer:sequence|]].
-===== Handle Faults in the Control System =====
-input not connected, forget to connect
-nan
-initial signals = nan, forget to addBlock
-remove block
-===== Switch Block Switches Automatically =====
-There are cases were a switch block has to switch to a certain input under given conditions. While it might be possible to use the safety system to check this condition it might be preferable if the switch block itself switches when a certain condition is met. To use the sequencer for this purpose is generally not advisable as realtime cannot be met there. \\
-For further information refer to [[eeros_architecture:control_system:available_blocks:switch|]] or check the example in [[getting_started:tutorials:controlsystem4|Control System Containing Switch Blocks ]].
-===== Block with Parameters =====
-Situation: inner states of blocks can be changed only through signals or getter / setter methods. How to implement a slowly changing inertia matrix? You do not want to calculate this matrix out of regular signals with full speed. Solution: use slow time domain for this purpose and change ...
-===== How to Stop a System with CTRL-C =====
-===== How to interact betwenn Sequencer and Control System =====
-Seq soll signale in CS setzen (const) oder lesen \\