Differences

This shows you the differences between two versions of the page.

--- getting_started:install_and_setup_development_environment:use_with_cb20 [2020/06/04 11:58] – ursgraf
+++ getting_started:install_and_setup_development_environment:use_with_cb20 [2021/02/26 11:42] – ursgraf
@@ Line 1: / Line 1: @@
 ====== Use on a cb20 Board ======
-The following is a step-by-step procedure to get started using EEROS on the [[https://wiki.ntb.ch/infoportal/embedded_systems/imx6/cb#cb20_board|cb20 Board]]. It describes how to set up the cross development tool chain. The application is developed on a Linux host machine and can then be deployed to the board.
+The following is a step-by-step procedure to get started using EEROS on the [[https://wiki.ntb.ch/infoportal/embedded_systems/imx6/cb#cb20_board|cb20 Board]]. It describes how to set up the SDK. The application is developed on a Linux host machine and can then be deployed to the board.
-As cross tool chain, the **arm-linux-gnueabihf-gcc-4.9** is needed. It is recommended to use a Ubuntu 16.04 as host operating system, since this packet is available in the default repositories.
+Get an suitable image for your target platform from [[https://wiki.bu.ost.ch/infoportal/software/linux/images/start|Linux Images]] and install it on your target system, see [[https://wiki.bu.ost.ch/infoportal/software/linux/toradex/toradex-easy-installer]].
-If a Linux host is used in a virtual machine, a [[https://lubuntu.net/downloads/|lightweight Ubuntu distribution]] is recommended. In case you are using a newer Ubuntu version, you have to add //xenial// to your sources list, see [[https://askubuntu.com/questions/1036108/install-gcc-4-9-at-ubuntu-18-04]].
+Get the associated SDK from [[https://wiki.bu.ost.ch/infoportal/software/linux/images/start|Linux Images]]
+Unpack it on your host system with <code>$ tar -vxJf ntb-dev-image-cb20-1.0_sdk.tar.xz</code>
+Change into the sdk directory and execute the script therein with <code>$ cd sdk
+$ ./tdx-xwayland-glibc-x86_64-ntb-ros-image-melodic-armv7at2hf-neon-cb20-toolchain-5.0.0.sh</code>
 Fetch the [[https://github.com/eeros-project/eeros-build-scripts.git|EEROS scripts]] on your cross development system with
 <code>
-$ git clone https://github.com/eeros-project/eeros-build-scripts.git eeros-project
+$ git clone https://github.com/eeros-project/eeros-build-scripts.git cb20
-$ cd eeros-project
+$ cd cb20
 </code>
-If you want to use flink, edit the file ''config.sh.in'' as follows
+Edit the file ''config.sh.in'' as follows
 <code>
 use_simulator=false
@@ Line 19: / Line 24: @@
 use_can=false
 use_custom_application=true
+use_cross_compilation_environment=true
+use_ros_setup_script=false
 </code>
+The entry ''use_cross_compilation_environment'' ensures that you compile using an SDK built for the target platform. Make sure to install the SDK by
+  * downloading the SDK from [[https://wiki.bu.ost.ch/infoportal/software/linux/images/start|Linux Images]]
+  * installing the SDK as described in [[https://wiki.bu.ost.ch/infoportal/software/linux/toradex/toradex-sdk]]
+Edit the file ''config.sh.in'' as follows
+<code>
+environment_setup_script=/opt/tdx-xwayland/5.0.0/environment-setup-armv7at2hf-neon-tdx-linux-gnueabi
+</code>
+This will guide your make script to use the SDK. Make sure that the above path matches your installation path.
 If you want to use CAN, choose
 <code>
-use_can=false
+use_can=true
 </code>
-Setting the last entry to //true// will fetch an existing application from a git repository. Per default this will will be [[https://github.com/eeros-project/simple-motor-control.git]]. However, you could choose another repository in ''config.sh.in''. Or you could set the entry to //false// if you want to develop your own application. \\ \\
+Setting the entry ''use_custom_application'' to //true// will fetch an existing application from a git repository. Per default this will will be [[https://github.com/eeros-project/simple-motor-control.git]]. However, you could choose another repository in ''config.sh.in''. Or you could set the entry to //false// if you want to develop your own application. \\
+Now you can run the ''clone'' script
+<code>
+$ ./clone.sh
+</code>
+After this you can continue with [[getting_started:compile_eeros|]].
+==== Test Application ====
 There is a test application for the cb20 board in [[https://github.com/ntb-ch/cb20.git]] under the directory ///Software//. If you wish to use this you can alter ''config.sh.in'' as follows
 <code>