Real-Time Robotics Framework

User Tools

Site Tools

You are here: EEROS Wiki » Get Started Using EEROS » install_and_setup_development_environment » Use on a cb20 Board
getting_started:install_and_setup_development_environment:use_with_cb20

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
Last revisionBoth sides next revision
getting_started:install_and_setup_development_environment:use_with_cb20 [2021/02/12 17:51] – ursgrafgetting_started:install_and_setup_development_environment:use_with_cb20 [2021/02/26 11:42] – ursgraf
Line 1: Line 1:
 ====== Use on a cb20 Board ====== ====== Use on a cb20 Board ======
-The following is a step-by-step procedure to get started using EEROS on the [[https://wiki.ntb.ch/infoportal/embedded_systems/imx6/cb#cb20_board|cb20 Board]]. It describes how to set up the cross development tool chain. The application is developed on a Linux host machine and can then be deployed to the board.+The following is a step-by-step procedure to get started using EEROS on the [[https://wiki.ntb.ch/infoportal/embedded_systems/imx6/cb#cb20_board|cb20 Board]]. It describes how to set up the SDK. The application is developed on a Linux host machine and can then be deployed to the board.
  
-On the host, you have to install the cross development SDK, see [[https://wiki.ntb.ch/infoportal/software/linux/toradex/start|Linux on Toradex Colibri i.MX6]]. Also make sure to have the newest image from our download section [[https://wiki.ntb.ch/infoportal/software/linux/images/start|Linux Images]] installed on the target.+Get an suitable image for your target platform from [[https://wiki.bu.ost.ch/infoportal/software/linux/images/start|Linux Images]] and install it on your target system, see [[https://wiki.bu.ost.ch/infoportal/software/linux/toradex/toradex-easy-installer]].
  
 +Get the associated SDK from [[https://wiki.bu.ost.ch/infoportal/software/linux/images/start|Linux Images]]
 +
 +Unpack it on your host system with <code>$ tar -vxJf ntb-dev-image-cb20-1.0_sdk.tar.xz</code>
 +
 +Change into the sdk directory and execute the script therein with <code>$ cd sdk
 +$ ./tdx-xwayland-glibc-x86_64-ntb-ros-image-melodic-armv7at2hf-neon-cb20-toolchain-5.0.0.sh</code> 
 Fetch the [[https://github.com/eeros-project/eeros-build-scripts.git|EEROS scripts]] on your cross development system with Fetch the [[https://github.com/eeros-project/eeros-build-scripts.git|EEROS scripts]] on your cross development system with
 <code> <code>
-$ git clone https://github.com/eeros-project/eeros-build-scripts.git eeros-project +$ git clone https://github.com/eeros-project/eeros-build-scripts.git cb20 
-$ cd eeros-project+$ cd cb20
 </code> </code>
 Edit the file ''config.sh.in'' as follows Edit the file ''config.sh.in'' as follows