Differences

This shows you the differences between two versions of the page.

--- getting_started:install_and_setup_development_environment:use_with_cb20 [2021/02/26 11:39] – ursgraf
+++ getting_started:install_and_setup_development_environment:use_with_cb20 [2021/02/26 11:42] – ursgraf
@@ Line 2: / Line 2: @@
 The following is a step-by-step procedure to get started using EEROS on the [[https://wiki.ntb.ch/infoportal/embedded_systems/imx6/cb#cb20_board|cb20 Board]]. It describes how to set up the SDK. The application is developed on a Linux host machine and can then be deployed to the board.
-  - Get an suitable image for your target platform from [[https://wiki.bu.ost.ch/infoportal/software/linux/images/start|Linux Images]] and install it on your target system, see [[https://wiki.bu.ost.ch/infoportal/software/linux/toradex/toradex-easy-installer]].
+Get an suitable image for your target platform from [[https://wiki.bu.ost.ch/infoportal/software/linux/images/start|Linux Images]] and install it on your target system, see [[https://wiki.bu.ost.ch/infoportal/software/linux/toradex/toradex-easy-installer]].
-  - Get the associated SDK from [[https://wiki.bu.ost.ch/infoportal/software/linux/images/start|Linux Images]]
-  - Unpack it on your host system with <code>$ tar -vxJf ntb-dev-image-bblue-2020.02.21-sdk.tar.xz</code>
+Get the associated SDK from [[https://wiki.bu.ost.ch/infoportal/software/linux/images/start|Linux Images]]
-  - Change into the sdk directory and execute the script therein with <code>$ cd sdk
+Unpack it on your host system with <code>$ tar -vxJf ntb-dev-image-cb20-1.0_sdk.tar.xz</code>
+Change into the sdk directory and execute the script therein with <code>$ cd sdk
 $ ./tdx-xwayland-glibc-x86_64-ntb-ros-image-melodic-armv7at2hf-neon-cb20-toolchain-5.0.0.sh</code>
 Fetch the [[https://github.com/eeros-project/eeros-build-scripts.git|EEROS scripts]] on your cross development system with