Differences

This shows you the differences between two versions of the page.

--- getting_started:ros [2017/11/20 16:36] – [Using Publisher and Subscriber Blocks in the Control System] graf
+++ getting_started:ros [2017/11/20 17:28] – [Using ROS through EEROS HAL] graf
@@ Line 8: / Line 8: @@
 ===== Using ROS through EEROS HAL =====
-EEROS can communicate with the underlying hardware through its [[eeros_architecture:hal:start|]]. When using this, you need a wrapper library (see ).
+EEROS can communicate with the underlying hardware through its [[eeros_architecture:hal:start|]]. When using this, you need a special wrapper library (see ).
-[{{ :getting_started:roshal.png?400 |//Connect with ROS topics through the HAL}}]
+[{{ :getting_started:roshal.png?350 |//Connect with ROS topics through the HAL//}}]
-When using
+The EEROS HAL signals can be comprised of digital or analog inputs or outputs. They are specified in a JSON file. \\
+If you want to test your application with a [[http://gazebosim.org/|Gazebo]] simulation, you can define your inputs and outputs as ROS topics to connect your application with the simulation. For this no hardware is necessary. To use your application with hardware, you can use any of the available [[eeros_architecture:hal:hardware_libraries|]], for example, use the wrapper library \textit{comedi-eeros} or \textit{flink-eeros}.
+If you adapt the *.json file correctly, your application should now run on hardware with real encoders and motors without any problems.
+It is also possible to use ROS-topics alongside real hardware.
+You can use \textit{comedi-eeros} to read an encoder and set a control value for a motor.
+At the same time, you can publish the same values to ROS topics to visualize the state of the robot with \textit{rviz} (if you have a model of your robot) or you can monitor the values with a ROS tool like ''\textit{rqt}'' and display them in a graph with \textit{Multiplot} or as numbers with \textit{TopicMonitor}.
+With \textit{Multiplot} you can also store the values in a text file.
 ===== Preparations and Building =====