User Tools

Site Tools


getting_started:tutorials:systemros1

Control System Talking to ROS

EEROS can work with ROS1 or ROS2. However, you have to make sure, that you compile EEROS with support for the right version of ROS. Further, the naming and use of the tools in ROS1 and ROS2 have slightly changed.

Using ROS1

In the EEROS library you will find a directory with examples. For this example see RosTest1.cpp.

Open a shell in the build directory of your EEROS library. This examples with ROS will only be present in your build directory if ROS was installed before building EEROS with -DUSE_ROS=TRUE set, see Preparations and Building.

If you work on a target make sure to setup the environment as given in Running your ROS Example.

Open a shell and run

$ roscore

Open another shell in the build directory of your EEROS library and run

$ sudo -E ./examples/ros/rosTest1

IMPORTANT You have to run a program using real time threads with root privileges.

Publishing

This example runs your EEROS application as a ROS node under the name /eerosNode. It publishes three topics

  • /test/vector (of type Matrix<7,1,double>)
  • /test/val (of type double)
  • /test/safetyLevel (of type unit32_t)

With

$ rosnode list

you will see the new node.

$ rostopic list

will list the three topics which are published be our node, /test/val, /test/vector, and /test/safetyLevel. Open another shell to show the messages sent by EEROS, e.g.

$ rostopic echo /test/vector

With

$ rostopic hz /test/val

you can easily check how often data is sent from out ROS node. Try to plot the data with

$ rqt_plot /test/val /test1/vector/data[0] /test/vector/data[1] /test/safetyLevel

Subscribing

Open another shell in the build directory of your EEROS library and run rosNodeTalker. This is not a EEROS program but simply starts a ROS node which publishes a couple of test topics. As soon as rosNodeTalker runs, your example application will receive the two topics

  • /rosNodeTalker/vector (of type Matrix<2,1,double>)
  • /rosNodeTalker/val (of type double)

and logs its transported message values into the console. Alternatively you could publish a single message from the command line with

$ rostopic pub /rosNodeTalker/val std_msgs/Float64 -- -2.3
$ rostopic pub /rosNodeTalker/vector std_msgs/Float64MultiArray "{layout: {dim: [], data_offset: 0}, data: [2.5, 1.76]}"

Use

$ rqt_graph

to show a graph with all involved nodes together with their topics.

Using ROS2

In the EEROS library you will find a directory with examples. For this example see RosTest1.cpp.

Open a shell in the build directory of your EEROS library. This examples with ROS2 will only be present in your build directory if ROS2 was installed before building EEROS with -DUSE_ROS2=TRUE set, see Preparations and Building.

If you work on a target make sure to setup the environment as given in Running your ROS Example.

Open a shell in the build directory of your EEROS library and run

$ sudo -E ./examples/ros2/rosTest1

IMPORTANT You have to run a program using real time threads with root privileges.

Publishing

This example runs your EEROS application as a ROS node under the name /eerosNode. It publishes three topics

  • /test/vector (of type Matrix<7,1,double>)
  • /test/val (of type double)
  • /test/safetyLevel (of type unit32_t)

With

$ ros2 node list

you will see the new node.

$ ros2 topic list

will list the three topics which are published be our node, /test/val, /test/vector, and /test/safetyLevel. Open another shell to show the messages sent by EEROS, e.g.

$ ros2 topic echo /test/vector

With

$ ros2 topic hz /test/val

you can easily check how often data is sent from out ROS node.

Subscribing

Open another shell in the build directory of your EEROS library and run rosNodeTalker. This is not a EEROS program but simply starts a ROS node which publishes a couple of test topics. As soon as rosNodeTalker runs, your example application will receive the two topics

  • /rosNodeTalker/vector (of type Matrix<2,1,double>)
  • /rosNodeTalker/val (of type double)

and logs its transported message values into the console. Alternatively you could publish a single message from the command line with

$ ros2 topic pub /rosNodeTalker/val std_msgs/msg/Float64 "data: -2.3"
$ ros2 topic pub /rosNodeTalker/vector std_msgs/msg/Float64MultiArray "{layout: {dim: [], data_offset: 0}, data: [2.5, 1.76]}"

Use

$ rqt

to show a graph with all involved nodes together with their topics or to plot messages.

getting_started/tutorials/systemros1.txt · Last modified: 2023/02/27 14:00 by ursgraf