User Tools

Site Tools


tools:matrix:start

This is an old revision of the document!


Vectors and Matrices

The blocks in the control system are connected among each other with the aid of signals. As described in Signals they carry a timestamp and a value. The value could be a simple type such as an integer or float. Quite often it will consist of a vector or a matrix. A three dimensional vector of type double can be declared and initialized as follows:

Vector<3, double> v; 
v << 1.5, -2, 0;

The declaration could be simplified to

Vector3<> v; 
v << 1.5, -2, 0;

as Vector3 is a predefined type with three dimensions and the default element type is double. A matrix of 3 times 3 with element type int could be defined as

Matrix<3, 3, int> m; 
m << 1, 4, 7,
     2, 5, 8,
     3, 6, 9;

The first three numbers will be filled into the first colon. While the internal representation is simply a one dimensional vector, the matrix could be visualized as

1 2 3
4 5 6
7 8 9

Accessing Elements

You can access rows, columns or single elements of matrices with the following methods:

m.get(0,0);  // returns element, 1
m.getRow(1);  // returns row, [2,5,8]
m.getCol(0);  // returns column, [1,2,3]'
m.getSubMatrix<2,2>(0,1);   // returns matrix [[4,5][7,8]]

Single elements, rows or columns can be written with the methods set(), setRow(), or setCol().

The operators () and [] work as well as can be seen by the following example

m(3);   // returns element or sets element with index 3 
m[3];   // returns element or sets element with index 3 
m(2,1);   // returns element or sets element with index 7
m[2,1];   // does not work, as the [] operator cannot be defined for two parameters

Logging Matrices

tools/matrix/start.1631807080.txt.gz · Last modified: 2021/09/16 17:44 by ursgraf