Real-Time Robotics Framework

User Tools

Site Tools

You are here: EEROS Wiki » Get Started Using EEROS » Installation and Setup
getting_started:install

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
getting_started:install [2021/03/25 10:57] – ursgrafgetting_started:install [2024/11/15 09:39] (current) – ursgraf
Line 1: Line 1:
 ====== Installation and Setup ====== ====== Installation and Setup ======
  
 +We strongly recommend to use our build scripts and if you cross develop then use our prebuilt images together with the associated SDKs (software development kit). These images already contain the necessary libraries. All you have to do is build your own application and deploy it. 
  
-Setting up the correct way of compiling and using EEROS can be quite cumbersome. We strongly recommend to use our build scripts and if you cross develop then use our prebuilt images together with the associated SDKs (software development kit). These images already contain the necessary libraries. All you have to do is build your own application and deploy it.  +The installation instructions below presume that you have minimal knowledge of basic commands in Linux, such as navigating the file system and creating and editing files. There is plenty on good online help, e.g.  [[http://korflab.ucdavis.edu/bootcamp.html]].
-What to you want to do with EEROS? +
  
-  * Run examples on the host, use with the simulator → see [[getting_started:install:use_on_host|]]+What do you want to do with EEROS?  
 + 
 +  * Run examples on the host, use with the simulator or with ROS → see [[getting_started:install:use_on_host|]]
   * Use it on the Beaglebone Blue board → see [[getting_started:install:use_on_bbb|]]   * Use it on the Beaglebone Blue board → see [[getting_started:install:use_on_bbb|]]
   * Use it on the cb20 board with flink or CAN → see [[getting_started:install:use_with_cb20]]   * Use it on the cb20 board with flink or CAN → see [[getting_started:install:use_with_cb20]]
-  * Use it with EtherCAT on x86 platform → see [[https://wiki.ntb.ch/infoportal/embedded_systems/ethercat/start]]+  * Use it on the Avnet Microzed board with flink → see [[getting_started:install:use_with_microzed]] 
 +  * Use it with EtherCAT on x86 platform → see [[https://wiki.bu.ost.ch/infoportal/embedded_systems/ethercat/start]]
   * Develop EEROS and its hardware wrapper libraries itself → see [[getting_started:install:manually|]]   * Develop EEROS and its hardware wrapper libraries itself → see [[getting_started:install:manually|]]
  
getting_started/install.1616666269.txt.gz · Last modified: 2021/03/25 10:57 by ursgraf