Differences

This shows you the differences between two versions of the page.

--- getting_started:install [2021/03/31 09:49] – ursgraf
+++ getting_started:install [2023/04/12 10:22] (current) – ursgraf
@@ Line 3: / Line 3: @@
 We strongly recommend to use our build scripts and if you cross develop then use our prebuilt images together with the associated SDKs (software development kit). These images already contain the necessary libraries. All you have to do is build your own application and deploy it.
-Setting up EEROS and the necessary libraries manually can be quite cumbersome. Do it when you have some knowledge about development on Linux.
+The installation instructions below presume that you have minimal knowledge of basic commands in Linux, such as navigating the file system and creating and editing files. There is plenty on good online help, e.g.  [[http://korflab.ucdavis.edu/bootcamp.html]].
 What do you want to do with EEROS?
@@ Line 10: / Line 10: @@
   * Use it on the Beaglebone Blue board → see [[getting_started:install:use_on_bbb|]]
   * Use it on the cb20 board with flink or CAN → see [[getting_started:install:use_with_cb20]]
-  * Use it with EtherCAT on x86 platform → see [[https://wiki.ntb.ch/infoportal/embedded_systems/ethercat/start]]
+  * Use it with EtherCAT on x86 platform → see [[https://wiki.bu.ost.ch/infoportal/embedded_systems/ethercat/start]]
   * Develop EEROS and its hardware wrapper libraries itself → see [[getting_started:install:manually|]]