This is an old revision of the document!
Use on a Beaglebone Blue Board
The following is a step-by-step procedure to get started using EEROS on the BeagleBone Blue board. It describes how to set up the cross development tool chain. The application is developed on a Linux host machine and can then be deployed to the board.
On the host, you have to install the cross development SDK, see Linux on Beaglebone blue. Also make sure to have the newest image from our download section Linux Images installed on the target.
Fetch the EEROS scripts on your cross development system with
$ git clone https://github.com/eeros-project/eeros-build-scripts.git eeros-project $ cd eeros-project
Edit the file config.sh.in
as follows
use_simulator=false use_flink=false use_bbblue=true use_comedi=false use_ros=false use_can=false use_custom_application=true use_cross_compilation_environment=true use_ros_setup_script=false
The entry use_cross_compilation_environment
ensures that you compile using an SDK built for the target platform. This SDK already contains the librobotcontrol. Make sure to install the SDK by
- downloading the SDK from Linux Images
- installing the SDK as described in https://wiki.bu.ost.ch/infoportal/software/linux/bbblue-sdk
Edit the file config.sh.in
as follows
environment_setup_script=/opt/ntb-distro/1.0/environment-setup-armv7at2hf-neon-poky-linux-gnueabi
This will guide your make script to use the SDK. Make sure that the above path matches your installation path.
Setting the entry use_custom_application
to true will fetch an existing application from a git repository. Per default this will will be https://github.com/eeros-project/simple-motor-control.git. However, you could choose another repository in config.sh.in
. Or you could set the entry to false if you want to develop your own application.
Now you can run the clone
script
$ ./clone.sh
After this you can continue with Compile.