Differences

This shows you the differences between two versions of the page.

--- getting_started:practical_problems:start [2017/09/24 16:27] – [Trigger Safety Event from Control System] graf
+++ getting_started:practical_problems:start [2018/03/19 18:09] – [Stumbling Blocks] graf
@@ Line 3: / Line 3: @@
 ===== Do's =====
-[[.:signal_checking|]]
+  * [[.:signal_checking]]
+  * [[.:rem_unused_blocks]]
+  * [[.:auto_switch]]
+  * [[.:abort]]
+  * [[.:realtime]]
 ===== Don'ts =====
+  * [[.:hidden_states]]
+  * [[.:seq_endless]]
 ===== Stumbling Blocks =====
+  * [[.:faults_cs]]
+  * [[.:add_saf_level]]
+  * [[.:no_log]]
-===== Avoid Hidden States in the Safety System =====
-It might be tempting to define elaborate actions in a certain safety level. However, in order to keep the safety system clean and simple avoid such practises. Do not define different states in a safety level. If you need to stay a certain amount of time in a safety level use the field ''nofActivations'' as described in [[eeros_architecture:safety_system:properties#counter|Counter]]. As soon as you want to model a more complex behaviour use a [[eeros_architecture:sequencer:sequence|]].
-===== Handle Faults in the Control System =====
-input not connected, forget to connect
-nan
-initial signals = nan, forget to addBlock
-remove block
-===== Remove Blocks when no longer used =====
-Blocks have to be added to a time domain and will then be run by this. If you have blocks which are used only for a certain task such as initialization, you can remove them after this task has finished in order to safe processing power, see [[eeros_architecture:control_system:time_domains|]].
-===== Switch Block Switches Automatically =====
-There are cases were a switch block has to switch to a certain input under given conditions. While it might be possible to use the safety system to check this condition it might be preferable if the switch block itself switches when a certain condition is met. To use the sequencer for this purpose is generally not advisable as realtime cannot be met there. \\
-For further information refer to [[eeros_architecture:control_system:available_blocks:switch|]] or check the example in [[getting_started:tutorials:controlsystem4|Control System Containing Switch Blocks ]].
-===== Block with Parameters =====
-Situation: inner states of blocks can be changed only through signals or getter / setter methods. How to implement a slowly changing inertia matrix? You do not want to calculate this matrix out of regular signals with full speed. Solution: use slow time domain for this purpose and change ...
-===== How to Stop a System with CTRL-C =====
-===== How to interact between Sequencer and Control System =====
-Seq soll signale in CS setzen (const) oder lesen \\
-===== Comparisons of Safety Level do not Work =====
-addLevel forgotten \\