User Tools

Site Tools


getting_started:tutorials:controlsystem4

This is an old revision of the document!


Control System Containing Switch Blocks

In the EEROS library you will find a directory with examples. Open a shell in the build directory of your EEROS library and run examples/controlsystem/BlockTest3.
A constant value is added up by the integrator block. The switch is configured to automatically switch to the second input as soon as the input value reaches 1.5 ± 0.1.

Control system of the example

Upon switching the block also triggers a safety event. The safety system has two safety levels. The system stays for three seconds in the second level. After that the cycle restarts.

getting_started/tutorials/controlsystem4.1491499602.txt.gz · Last modified: 2017/04/06 19:26 by 127.0.0.1