Differences

This shows you the differences between two versions of the page.

--- getting_started:tutorials:controlsystemcan1 [2024/06/10 13:58] – [CANopen] ursgraf
+++ getting_started:tutorials:controlsystemcan1 [2024/06/10 13:59] (current) – [Control System] ursgraf
@@ Line 18: / Line 18: @@
 ==== Control System ====
-The control system basically has just a block to send CAN packages to the drives and another block to receive information from them. You have to adjust the scaling for the sending and receiving block according to your gearboxes and encoders.
+The system comprises a control system, a safety system and a sequencer with a few sequences. The example assumes that you have two drives in your CAN network. The node identifiers are '1' and '2'. The control system basically has a [[eeros_architecture:control_system:available_blocks:cansend|]] and a [[eeros_architecture:control_system:available_blocks:canreceive|]] block. While being in the safety level ''slInit'' the init sequence configures the drives to send TPDOs and receive RPDOs. Both drives are then brought into operational state and both blocks are enabled.
 ==== Safety System ====