Real-Time Robotics Framework

User Tools

Site Tools

You are here: EEROS Wiki » Get Started Using EEROS » Tutorials » Subsystem
getting_started:tutorials:subsystem

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
getting_started:tutorials:subsystem [2021/07/08 19:58] – ursgrafgetting_started:tutorials:subsystem [2021/07/08 20:00] (current) – ursgraf
Line 5: Line 5:
 Open a shell in the build directory of your EEROS library and run  Open a shell in the build directory of your EEROS library and run 
 <code> <code>
-$ sudo ./examples/system/systemTest3+$ sudo ./examples/system/subSystemTest
 </code> </code>
 IMPORTANT You have to run a program using real time threads with root privileges. We do not use the simulator in this example, hence there is no need to set the library path.  IMPORTANT You have to run a program using real time threads with root privileges. We do not use the simulator in this example, hence there is no need to set the library path. 
  
-The example comprises a safety system with only +The example shows how a few blocks are packed into a subsystem which is used by a control system also using other blocks.
getting_started/tutorials/subsystem.1625767109.txt.gz · Last modified: 2021/07/08 19:58 by ursgraf