Real-Time Robotics Framework

User Tools

Site Tools

You are here: EEROS Wiki » Get Started Using EEROS » Tutorials » Simple System with Control and Safety System
getting_started:tutorials:system1

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
getting_started:tutorials:system1 [2021/03/30 13:47] – ursgrafgetting_started:tutorials:system1 [2026/04/12 12:21] (current) – ursgraf
Line 6: Line 6:
 Open a shell in the build directory of your EEROS library and run  Open a shell in the build directory of your EEROS library and run 
 <code> <code>
-$ sudo LD_LIBRARY_PATH=/home/you/work/project/install-x86/lib/ ./examples/system/systemTest1 -c examples/system/SystemTest1Config.json+$ ./examples/system/systemTest1 -c examples/system/SystemTest1Config.json
 </code> </code>
-IMPORTANT You have to run a program using real time threads with root privileges and you have to set your library path so that the simulator library can be found, see [[getting_started:deploy:deploy_host|]]. +IMPORTANT If you have to run a program using real time threads, make sure that you allow your user to set realtime priorities as shown in [[getting_started:tutorials:rttest|]]. 
  
 This example encompasses a safety system and a control system. The control system has one time domain running several blocks This example encompasses a safety system and a control system. The control system has one time domain running several blocks
getting_started/tutorials/system1.txt · Last modified: 2026/04/12 12:21 by ursgraf