Real-Time Robotics Framework

User Tools

Site Tools

You are here: EEROS Wiki » Get Started Using EEROS » Tutorials » Triggering Safety Event from Control System
getting_started:tutorials:system3

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
getting_started:tutorials:system3 [2026/04/12 15:59] – ursgrafgetting_started:tutorials:system3 [2026/04/12 16:00] (current) – ursgraf
Line 7: Line 7:
 $ ./examples/system/systemTest3 $ ./examples/system/systemTest3
 </code> </code>
-IMPORTANT We do not use the simulator in this example, hence there is no need to set the library path.  
  
 The example comprises a safety system with only two safety levels and two safety events. The system will start in the safety level ''slStart''. It will stay there for three seconds after which a safety event is triggered which causes a level change to ''slRampingUp''. The control system for this example consists of three block as shown below: [{{ .:safetysystemtest2.png?500 | //Control system of the example//}}] The example comprises a safety system with only two safety levels and two safety events. The system will start in the safety level ''slStart''. It will stay there for three seconds after which a safety event is triggered which causes a level change to ''slRampingUp''. The control system for this example consists of three block as shown below: [{{ .:safetysystemtest2.png?500 | //Control system of the example//}}]
getting_started/tutorials/system3.txt · Last modified: 2026/04/12 16:00 by ursgraf