Real-Time Robotics Framework

User Tools

Site Tools

You are here: EEROS Wiki » Get Started Using EEROS » Tutorials » Transitions Between Different Timedomains
getting_started:tutorials:transition1

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
getting_started:tutorials:transition1 [2021/06/06 13:53] – ursgrafgetting_started:tutorials:transition1 [2026/04/12 16:10] (current) – ursgraf
Line 5: Line 5:
 Open a shell in the build directory of your EEROS library and run  Open a shell in the build directory of your EEROS library and run 
 <code> <code>
-$ sudo ./examples/block/transitionBlockTest+$ ./examples/block/transitionBlockTest
 </code> </code>
-IMPORTANT You have to run a program using real time threads with root privileges.  
  
 The example demonstrates the use of two different transition blocks. The systems runs two timedomains, one with 5s, the second with 50ms. The first transition block works as interpolator with a ratio of 100. The second transition transfer the same signal from the fast timedomain back to the slow timedomain and has a ratio of 0.01.  The example demonstrates the use of two different transition blocks. The systems runs two timedomains, one with 5s, the second with 50ms. The first transition block works as interpolator with a ratio of 100. The second transition transfer the same signal from the fast timedomain back to the slow timedomain and has a ratio of 0.01. 
getting_started/tutorials/transition1.txt · Last modified: 2026/04/12 16:10 by ursgraf