Differences

This shows you the differences between two versions of the page.

--- tools:singlestepping [2017/09/30 17:59] – created graf
+++ tools:singlestepping [2017/10/01 18:06] – [Single Stepping] graf
@@ Line 1: / Line 1: @@
 ====== Single Stepping of Sequences ======
-During the development process it can be useful to be able to run sequences in single stepping mode.
+During the development process it can be useful to be able to run sequences in single stepping mode. For this purpose you can remote connect to the machine running the EEROS application and run sequences in single stepping mode. As soon as the sequencer is created (see [[eeros_architecture:sequencer:sequencer|]]) a server is started onto which a client can connect through a TCP/IP connection.
+===== EEROS Application =====
+Define and use a sequencer with
+<code cpp>
+  auto& sequencer = Sequencer::instance();               // get instance
+</code>
+After successful compilation start the application
+===== Single Stepping =====
+On the machine where you wish to control your application sequences you have to install EEROS. Next, navigate to the directory ''tools'' in your build directory of the EEROS library. Run ''sequencerUI'' to remotely connect to the machine running your EEROS application and pass its ip-address as a parameter.
+<code>
+$ ./sequencerUI "146.136.10.7"
+$ ./sequencerUI "localhost"  // if the EEROS application runs on the same machine
+</code>