Differences

This shows you the differences between two versions of the page.

--- eeros_architecture:control_system:available_blocks:ros2subdigitalsignal [2025/03/18 13:50] – created ursgraf
+++ eeros_architecture:control_system:available_blocks:ros2subdigitalsignal [2025/03/18 13:59] (current) – ursgraf
@@ Line 1: / Line 1: @@
-====== ROS2 Subscriber Double ======
+====== ROS2 Subscriber Digital Signal ======
-This block receives ROS messages of type ''eeros_msgs::msg::AnalogSignal''. Each time the block is run by its time domain, the message content is written to the output of the block.
+This block receives ROS messages of type ''eeros_msgs::msg::DigitalSignal''. Each time the block is run by its time domain, the content of the last message is written to the signal output of the block.
 <code cpp>
-  RosSubscriberAnalogSigbalDouble subDouble(node, "myNode/myTopic"); // create subscriber block
+  RosSubscriberDigitalSignal<> sub(node, "myNode/myTopic"); // create subscriber block
 </code>
-IMPORTANT The message is transmitted without time stamp. The time stamp of the signal is set to the actual time when running the block.
+IMPORTANT The time stamp of the signal is set to the time stamp of the message.
+Alternatively, you could receive a vector by instantiating a block with
+<code cpp>
+  RosSubscriberDigitalSignal<Vector3> sub(node, "myTopic"); // create subscriber block
+</code>