Differences

This shows you the differences between two versions of the page.

--- eeros_architecture:control_system:available_blocks:canreceivefaulhaber [2020/06/04 18:19] – created ursgraf
+++ eeros_architecture:control_system:available_blocks:canreceivefaulhaber [2024/05/30 15:22] (current) – removed ursgraf
@@ Line 1: / Line 1: @@
-====== CAN Receive Faulhaber ======
-This block receives PDO packets over a CAN bus to a Faulhaber drive. The drive itself must be initialized by SDO transfers up to the point where PDO transfer is possible. Each time the block is run by its time domain, a ''sync'' message is sent followed by RPDO1 (carrying the control word) and RPDO2 (velocity). While the control word can be set by the method
-<code cpp>
-setCtrl(Matrix<nofNodes,1,uint16_t>);
-</code>
-the velocity is taken from its input ''vel''. \\
-This blocks uses the [[http://github.com/ntb-ch/canopenlib|canopenlib]]. The connection to the CAN bus must be first established through a