Differences

This shows you the differences between two versions of the page.

--- eeros_architecture:control_system:available_blocks:gain [2021/11/14 17:49] – ursgraf
+++ eeros_architecture:control_system:available_blocks:gain [2022/04/21 13:36] (current) – [Gain] ursgraf
@@ Line 1: / Line 1: @@
 ====== Gain ======
-The gain block allows to amplify an input signal. In general, the input signal is of type matrix and hence, the gain will have to be a matrix as well. However, the type of the input signal and the output signal must be the same. This is because when the gain block is disabled the output is equal to the input. When declaring a gain block you have to make sure that the input type multiplied with the gain matrix produces a result with the same type as the input type.
+The gain block allows to amplify an input signal. In general, the input signal is of type matrix and hence, the gain will have to be a matrix as well. However, the type of the input signal and the output signal must be the same. When the gain block is disabled the output is equal to the input. When declaring a gain block you have to make sure that the gain matrix multiplied with the input type produces a result with the same type as the input type.
 The following lines show various examples.
 <code cpp>
-Gain<Matrix<1,2>, Matrix<2,2>> g1({1,2.5,-1,-0.5});  // result will be of type Matrix<1,2>
+Gain<Matrix<2,1>, Matrix<2,2>> g1({1,2.5,-1,-0.5});  // result will be of type Matrix<2,1>
 </code>
-The first template parameter denotes the input signal. The gain here is a 2x2-matrix.
+The first template parameter denotes the type of the input and output signal. The second template parameter is the type of the gain, which here is a 2x2-matrix.
+<code cpp>
+Gain<Matrix<1,2>, Matrix<2,2>> g1({1,2.5,-1,-0.5});  // not allowed
+</code>
+This is not allowed because the multiplication of two matrices with the first having dimensions of [2,2] and the second of [1,2] is not defined.
 If a ''Gain'' block is declared with a single value each element of the input vector is multiplied with this value.
 <code cpp>